DRT Motorsports Polaris RZR Turbo S Billet Tie Rod Kit (2018–2027)

Factory RZR Turbo S tie rods leave riders with OEM rod ends and less strength than this billet replacement. Dirt, sand and water can also reach the steering rack if its bellows are not sealed. Listed for: Polaris RZR Turbo S 2018 - 2027; Polaris RZR Turbo S 4 2018 - 2027; Polaris RZR Turbo S Velocity 2018 - 2027. Fitment is not guaranteed on unlisted applications. DRT Motorsports replaces the OEM rod ends with PTFE-lined chromoly ends and uses a proprietary inner ball joint to seal the OEM bellows at the steering rack.

Key Features

• 6061-T6 billet aluminum tie rods
• PTFE-lined 5/8-inch chromoly rod ends
• Proprietary inner ball joint seals the OEM bellows
• Machined wrench notches for adjustment
• 303 stainless steel rod end spacers
• Black anodized finish with laser-engraved branding
• Clearance through steering travel at full droop and compression

Built To Solve: RZR Turbo S Tie Rod Strength and Rack Sealing

• Replace the OEM rod ends with PTFE-lined chromoly ends.
• Seal the OEM bellows against water, dirt and sand at the M16 rack.
• Adjust the tie rods using machined wrench notches.
• Maintain clearance around suspension and steering parts through the stated range of motion.

Best For: Polaris RZR Turbo S Riders Replacing Tie Rods

• Turbo S riders replacing factory rod ends with a billet tie rod setup.
• Turbo S 4 owners with the 72-inch platform and OEM M16 rack.
• Riders who want wrench-notch adjustment and PTFE-lined rod ends.

Specifications

• Tie rod material: 6061-T6 aluminum
• Rod ends: 3-piece PTFE-lined, 5/8-inch chromoly
• Rod end spacers: 303 stainless steel
• Hardware grade: Class 10.9
• Finish: Black anodized
• Steering rack: OEM M16
• Manufacturer part numbers: 20010TR03201

What's in the Box

• PTFE-lined 5/8-inch chromoly rod ends
• Proprietary inner ball joint
• Stainless steel misalignment spacers
• Class 10.9 hardware

Fitment

• Polaris RZR Turbo S 2018 - 2027
• Polaris RZR Turbo S 4 2018 - 2027
• Polaris RZR Turbo S Velocity 2018 - 2027

Fitment is based on current product data for this part and is not guaranteed on unlisted applications. If you don't see your exact setup, contact us and we'll confirm fitment before you order.

FAQ

Does this tie rod kit fit the RZR Pro XP?

No. This kit is for the specified Turbo S applications, not the Pro XP.

What should I check when installing and maintaining the jam nuts?

Use thread locker, verify the jam nuts are tight and inspect them before each ride. A paint mark can help show movement.

What size are the chromoly rod ends?

The PTFE-lined chromoly rod ends are 5/8 inch.

Which steering rack does this kit work with?

It works with the OEM M16 steering rack.

Why choose these tie rods instead of retaining the OEM rod ends?

Choose this setup if you want to replace the OEM rod ends with PTFE-lined chromoly ends and retain sealing at the OEM bellows.

Why DRT Motorsports

DRT Motorsports uses a proprietary inner ball joint to seal the OEM bellows around the M16 steering rack.

Replace Your RZR Turbo S Tie Rods

Check your platform width and steering rack, then order the DRT Motorsports tie rod kit from Dunes 2 Dezert SXS.