DRT Motorsports Kawasaki Teryx KRX 1000 HD Billet Tie Rod Kit

The Kawasaki Teryx KRX 1000's OEM rod ends are replaced when upgrading the steering linkage, and replacement rods must clear suspension and steering components at full droop and compression. Listed for: Kawasaki Teryx KRX 1000. Fitment is not guaranteed on unlisted applications. The vendor does not list model years for this part - confirm your model year with us before ordering. DRT Motorsports KRX 1000 tie rods work with the OEM M16 rack and replace the OEM rod ends. A proprietary inner ball joint seals the OEM bellow to help protect the rack from water, dirt, and sand.

Key Features

• 6061-T6 billet aluminum tie rods
• PTFE-lined, three-piece 5/8-inch Chromoly rod ends
• Proprietary inner ball joint seals the OEM bellow
• 303 stainless steel rod end spacers
• Wrench notches for left- and right-hand adjustment
• Black anodized finish with laser-engraved branding
• Clearance through full droop, compression, and steering travel

Built To Solve: Kawasaki KRX 1000 Tie Rod Strength and Clearance

• Replaces the OEM rod ends while retaining the OEM M16 steering rack.
• Clears suspension and steering components at full droop and compression.
• Seals the OEM bellow to help keep water, dirt, and sand out of the steering rack.
• Provides machined wrench notches for tie rod adjustment.

Best For: Kawasaki KRX 1000 Riders Upgrading Steering

• KRX 1000 owners replacing OEM rod ends.
• KRX 1000/4 owners using the OEM M16 steering rack.
• Two- and four-door KRX owners seeking billet aluminum tie rods.
• Riders who want wrench notches for tie rod adjustment.

Specifications

• Tie rod material: 6061-T6 billet aluminum
• Rod ends: Three-piece PTFE-lined 5/8-inch Chromoly
• Rod end spacer material: 303 stainless steel
• Hardware grade: Class 10.9
• Finish: Black anodized
• Steering rack: OEM M16
• Manufacturer part numbers: 50010TR01201

What's in the Box

• PTFE-lined 5/8-inch Chromoly rod ends
• Proprietary inner ball joint
• Stainless steel misalignment spacers
• Class 10.9 hardware

Fitment

• Kawasaki Teryx KRX 1000

Fitment is based on current product data for this part and is not guaranteed on unlisted applications. If you don't see your exact setup, contact us and we'll confirm fitment before you order.

FAQ

Will these tie rods work with a steering rack other than the OEM M16?

The stated application is the OEM M16 steering rack; compatibility with other racks is not specified.

How should the jam nuts be secured?

Verify that the jam nuts are tight and installed with thread locker. A paint check is recommended to make movement visible.

Can two-door and four-door KRX owners choose the same kit?

The application lists both two- and four-door KRX models. Check that the machine has the OEM M16 steering rack.

What size are the Chromoly rod ends?

The PTFE-lined Chromoly rod ends are 5/8 inch.

How often should the jam nuts be checked?

Inspect the jam nuts before each ride to make sure they are tight and secure.

Why DRT Motorsports

DRT Motorsports uses a proprietary inner ball joint to seal the OEM bellow on this KRX tie rod kit.

Upgrade Kawasaki KRX 1000 Tie Rods

Order the DRT Motorsports KRX 1000 tie rod kit from Dunes 2 Dezert SXS.