{"product_id":"drt-polaris-rzr-turbo-s-s4-hd-billet-aluminum-tie-rod-kit-m16-rack","title":"RZR Turbo S \/ S4 HD Billet Tie Rod Kit (M16) | DRT Motorsports","description":"\u003ch1\u003ePolaris RZR Turbo S \/ S4 HD Billet Aluminum Tie Rod Kit (M16 Rack)\u003c\/h1\u003e\n\u003cp\u003eThe \u003cstrong\u003eDRT Motorsports Polaris RZR Turbo S \/ S4 HD Billet Aluminum Tie Rod Kit (M16 Rack)\u003c\/strong\u003e is designed to strengthen and add reliability to the 72\" Turbo S platform. This \u003cstrong\u003eTurbo S tie rod kit\u003c\/strong\u003e fits 2018+ Polaris RZR Turbo S and Turbo S4 (72\") equipped with the OEM M16 steering rack.\u003c\/p\u003e\n\u003cp\u003eMade from aerospace-grade 6061-T6 billet bar stock, this \u003cstrong\u003ebillet aluminum tie rod kit\u003c\/strong\u003e is much stronger than OEM, lighter in weight without sacrificing strength, and clears all components through the entire range of motion. Even at full droop or compression, this tie rod set clears all suspension and steering components at any point in the steering range so you can ride with confidence. Finished in military-grade black anodize and proudly made in the USA.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific fit — 2018+ Polaris RZR Turbo S \/ S4 (72\", M16 steering rack)\u003c\/li\u003e\n\u003cli\u003eMachined from aerospace-grade 6061-T6 billet aluminum\u003c\/li\u003e\n\u003cli\u003eMuch stronger than OEM, lighter without sacrificing strength\u003c\/li\u003e\n\u003cli\u003e3-piece PTFE-lined left\/right 5\/8\" chromoly rod ends\u003c\/li\u003e\n\u003cli\u003eProprietary inner ball joint seals OEM bellow against water, dirt, and sand\u003c\/li\u003e\n\u003cli\u003e303 stainless steel misalignment spacers\u003c\/li\u003e\n\u003cli\u003eClass 10.9 hardware for required clamping force\u003c\/li\u003e\n\u003cli\u003eMachined wrench-notch areas for adjustability\u003c\/li\u003e\n\u003cli\u003eMilitary-specification black anodized finish with laser-engraved DRT branding\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eApplication: 2018+ Polaris RZR Turbo S \/ S4 (72\", M16 rack)\u003c\/li\u003e\n\u003cli\u003eMaterial: Aerospace-grade 6061-T6 billet aluminum\u003c\/li\u003e\n\u003cli\u003eRod ends: 3-piece PTFE-lined 5\/8\" chromoly, left\/right hand\u003c\/li\u003e\n\u003cli\u003eSpacers: 303 stainless steel misalignment spacers\u003c\/li\u003e\n\u003cli\u003eHardware: Class 10.9\u003c\/li\u003e\n\u003cli\u003eFinish: Military-grade black anodize\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in the USA\u003c\/li\u003e\n\u003cli\u003eAdjustability: Left\/right adjustable via machined wrench notches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePolaris\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2018+ Polaris RZR Turbo S (2-door, M16 rack)\u003c\/li\u003e\n\u003cli\u003e2018+ Polaris RZR Turbo S4 (4-door, M16 rack)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFits models equipped with the OEM M16 steering rack.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhich steering rack does this fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is built for the OEM M16 steering rack on 2018+ Polaris RZR Turbo S and Turbo S4 (72\"). It works in conjunction with the OEM M16 rack and replaces the OEM rod ends.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit both the 2-seat and 4-seat Turbo S?\u003c\/h3\u003e\n\u003cp\u003eYes. It fits both the Turbo S (2-door) and Turbo S4 (4-door) 72\" models.\u003c\/p\u003e\n\u003ch3\u003eWill it clear my suspension at full droop and compression?\u003c\/h3\u003e\n\u003cp\u003eYes. The tie rods are designed to clear all suspension and steering components through the entire range of motion, even at full droop or full compression.\u003c\/p\u003e\n\u003ch3\u003eDoes it seal against water and dirt?\u003c\/h3\u003e\n\u003cp\u003eYes. The proprietary inner ball joint seals the OEM bellow to protect the steering rack from water, dirt, and sand intrusion.\u003c\/p\u003e\n\u003ch3\u003eIs it adjustable?\u003c\/h3\u003e\n\u003cp\u003eYes. Machined wrench-notch areas allow left\/right adjustment. Verify jam nuts are tight and installed with thread locker, and inspect before each ride.\u003c\/p\u003e\n\u003ch3\u003eIs it stronger than OEM?\u003c\/h3\u003e\n\u003cp\u003eYes. Machined from aerospace-grade 6061-T6 billet aluminum, the kit is much stronger than OEM while being lighter in weight without sacrificing strength.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy DRT Motorsports\u003c\/h2\u003e\n\u003cp\u003eDRT Motorsports engineers Polaris RZR Turbo S-specific steering components that solve real failure points. From aerospace-grade 6061-T6 billet construction to PTFE-lined chromoly rod ends, sealed inner ball joints, and made-in-the-USA manufacturing, every DRT tie rod kit delivers strength, sealing, and adjustability the OEM rods can't match.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eUpgrade your Turbo S steering with race-grade billet tie rods. Order the DRT Motorsports Turbo S \/ S4 HD Billet Aluminum Tie Rod Kit (M16 Rack) from Dunes 2 Dezert SXS — your authorized DRT Motorsports dealer.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation Video\u003c\/h2\u003e\n\u003cp\u003eThis installation video was filmed on a Polaris Pro XP; the process is the same for the Turbo S. If you have any questions during the install, please contact customer service.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/8HUdRhRgUe0\" title=\"YouTube video player\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Which steering rack does this fit?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"This kit is built for the OEM M16 steering rack on 2018+ Polaris RZR Turbo S and Turbo S4 (72 inch). It works in conjunction with the OEM M16 rack and replaces the OEM rod ends.\"}},{\"@type\":\"Question\",\"name\":\"Does it fit both the 2-seat and 4-seat Turbo S?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. It fits both the Turbo S (2-door) and Turbo S4 (4-door) 72 inch models.\"}},{\"@type\":\"Question\",\"name\":\"Will it clear my suspension at full droop and compression?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. The tie rods are designed to clear all suspension and steering components through the entire range of motion, even at full droop or full compression.\"}},{\"@type\":\"Question\",\"name\":\"Does it seal against water and dirt?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. The proprietary inner ball joint seals the OEM bellow to protect the steering rack from water, dirt, and sand intrusion.\"}},{\"@type\":\"Question\",\"name\":\"Is it adjustable?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Machined wrench-notch areas allow left\/right adjustment. Verify jam nuts are tight and installed with thread locker, and inspect before each ride.\"}},{\"@type\":\"Question\",\"name\":\"Is it stronger than OEM?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Machined from aerospace-grade 6061-T6 billet aluminum, the kit is much stronger than OEM while being lighter in weight without sacrificing strength.\"}}]},{\"@type\":\"VideoObject\",\"name\":\"DRT Polaris RZR Turbo S Billet Tie Rod Kit M16 Install\",\"description\":\"Installation video for the DRT Motorsports Polaris RZR Turbo S \/ S4 HD Billet Aluminum Tie Rod Kit (M16 rack).\",\"thumbnailUrl\":\"https:\/\/i.ytimg.com\/vi\/8HUdRhRgUe0\/hqdefault.jpg\",\"uploadDate\":\"2026-01-01\",\"embedUrl\":\"https:\/\/www.youtube.com\/embed\/8HUdRhRgUe0\"}]}\u003c\/script\u003e","brand":"Dunes 2 Dezert SXS","offers":[{"title":"Default Title","offer_id":43735728750678,"sku":"20010TR03201","price":320.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0561\/1497\/0710\/files\/drt-motorsports-tie-rods-default-title-drt-polaris-rzr-turbo-s-s4-hd-billet-aluminum-tie-rod-kit-m16-rack-26349577502756.jpg?v=1779262650","url":"https:\/\/gustovans.com\/products\/drt-polaris-rzr-turbo-s-s4-hd-billet-aluminum-tie-rod-kit-m16-rack","provider":"GustoVans","version":"1.0","type":"link"}